Views: 3451 (Data available since 06.02.2017)

The following is an example for configuring a FreePBX for use of telephony with Bitrix24.

To work with FreePBX, all you have to create in the settings is:

  1. A trunk with the configuration from Bitrix24;
  2. An incoming route that transfers calls to the given trunk.

Creating a trunk

Click to Enlarge

When creating a trunk, the fields Trunk Name and Outbound CallerID are required. The name of the trunk must be: voximplant. The number connected to the intranet must be in 11-digit format.

The code of the trunk itself (PEER Details field) is analogous to the code used in the settings of the SIP configuration:

disallow=all
allow=ulaw&alaw
dtmfmode=rfc2833
fromdomain=incoming.*.voximplant.com
type=friend
host=incoming.*.voximplant.com
fromuser=sip*
username=sip*
secret=*
insecute=port,invite
conext=contex-internal
nat=yes
qualify=yes

Creating a route

Click to Enlarge

When creating a route, you need to enter the telephone number connected to the intranet (the DID Number field) and choose the previously created trunk voximplant (the Set Destination field).




Courses developed by «Bitrix», Inc.